CONTACT US

DOT Gas Sampling Cylinder
Hydrostatic Testing

What Do We Offer?

As accredited service providers, our skilled technicians at National Hydro Cylinder Testing Services are dedicated to performing Hydrostatic Testing for DOT Gas Sampling Cylinders in Adelaide.

We proudly operate an approved gas cylinder test station, number 720, specializing in Gas Cylinder Hydrostatic Testing Services.

With over 35 years of industry experience, we are well-equipped to meet your Gas Sampling Cylinder Testing requirements.

By choosing us, you can be confident in receiving exceptional service and support from our friendly technicians, who are committed to helping you fulfill your Gas Cylinder Hydrostatic Testing needs in Adelaide.

If you have any inquiries, please don’t hesitate to contact us today.

Gas Sampling Cylinders

DOT-approved gas sampling cylinders are specialized pressure vessels that are designed, manufactured, and rigorously tested to comply with U.S. Department of Transportation (49 CFR) regulations, ensuring the safe storage and transportation of pressurized gases and liquids. These cylinders are commonly utilized in the oil and gas, petrochemical, and laboratory sectors to collect samples from remote locations for subsequent analysis.
Key Features and Specifications
  • Construction: Typically fabricated from 316L or 304L stainless steel to resist corrosion, with options for alloys such as Monel or Inconel available.
  • Design: Generally constructed from seamless tubing with spun ends, ensuring uniform wall thickness and internal volume.
  • Pressure Ratings: Offered in a variety of pressure ratings, typically up to 1,800 psi, 3,000 psi, or 5,000 psi.
  • Sizes: Capacities vary from small, portable units (e.g., 10 cm³ to 75 cm³) to larger containers (e.g., 3785 cm³ or 1 gallon).
  • Outage Tubes: Often included for liquefied gases, allowing for thermal expansion and preventing overpressurization during transport.
  • Safety Features: Typically equipped with rupture discs to safeguard against overpressure.
Common DOT Classifications
  • DOT 3A/3AA: Seamless steel cylinders, widely used for high-pressure gases.
  • DOT 3E: Commonly used for smaller, non-refillable, or specialized sampling cylinders.
  • DOT 4BA: Welded steel cylinders.
Compliance & Maintenance
  • Markings: All cylinders must feature clear, permanent markings on both the collar and body, which include the DOT specification, serial number, water capacity, tare weight, and re-qualification date.
  • Re-qualification: Cylinders are required to undergo periodic re-qualification (re-testing) at authorized facilities to maintain safety standards.
  • Storage Limits: Even a slight increase in temperature can lead to the expansion of liquids inside, potentially triggering the rupture disc, which makes proper filling and storage essential.
Crystal XP2i Digital Pressure Gauge for Hydrostatic Pressure Testing

Our Services

We offer a diverse array of services specifically designed for the Gas Community throughout Australia.

Gas Cylinders Out Of Date & Need A Test?
CONTACT US NOW