Adelaide  08 8445 6300
1300 88 FIRE
1300 88 34 73
Sales, service and maintenance of all fire safety equipment

Ansul Foam

 

Ansul AFFF 1% Foam

For use on Class B hydrocarbon fuel fires such as crude oils, gasoline, diesel fuels and aviation fuels. Aspirated or non aspirated discharge devices. 1% solution in fresh, salt or hard water. 1% premix in fresh or potable water. Also Available in: 20 Litre Pail, 200 Litre Drum, 1000 Litre Tote, Call us for bulk prices Images for display purposes only, All Ansul foam is packed in black square drums to suit Australian holders Images of products for information purposes only, products may not exactly correspond to illustrations".
Ansul 1% AFFF TSDS

 

Ansul AFFF 3% Foam

For use on Class B hydrocarbon fuel fires such as crude oils, gasoline, diesel fuels, and aviation fuels. Aspirated or non aspirated discharge devices. 3% solution in fresh, salt or hard water. 3% premix in fresh or potable water. Also Available in: 20 Litre Pail, 200 Litre Drum, 1000 Litre Tote, Call us for bulk prices Images for display purposes only, All Ansul foam is packed in black square drums to suit Australian holders Images of products for information purposes only, products may not exactly correspond to illustrations.
Ansul 3% AFFF MSDS

 

Ansul AFFF 6% Foam

For use on Class B hydrocarbon fuel fires such as crude oils, gasoline, diesel fuels and aviation fuels. Aspirated or nonaspirated discharge devices. 6% solution in fresh, salt or hard water. 6% premix in fresh or potable water. Also Available in 20 Litre Pail, 200 Litre Drum, 1000 Litre Tote, Call us for bulk prices Images for display purposes only, All Ansul foam is packed in black square drums to suit Australian holders Images of products for information purposes only, products may not exactly correspond to illustrations. 
Ansul 6% AFFF TSDS 
 
 
Ansul AFFF 6% ICAO-B Foam
Ansul Ansulite 6% ICAO-B AFFF concentrate is formulated from specialty flurochemical and hydrocarbons surfactants along with solvents. It is transported and stored as a concentrate to provide ease of use and considerable savings in weight and space. It is intended for use as a 6% proportional solution in fresh, salt  or hard water. (Water hardness should not exceed 500ppm expressed as calcium and magnesium) It may also be used and stored as a 6% premixed solution in a fresh or potable water only. The correct proportional or mixing ration is 6 parts of concentrate to 94 parts of water.      
Ansul 6% ICAO-B Foam MSDS 
Ansul 6% ICAO-B Foam TSDS
 
 
Ansul Jet- X High Expansion Foam
For use on Class A, B and LNG fires. Capable of total flooding large rooms and enclosures when used with JET-X high expansion generators at 200:1 to 1000:1 expansion ratios (2 3/4% concentration). Also used with medium-expansion equipment at 50:1 to 200:1 expansion ratios (2% concentration). Used only with air-aspirating foam discharge devices. UL Listed and FM Approved. Part number 420008.
Ansul Jet X High Expansion Foam TSDS
 
 
Ansul AR-AFFF 3% Foam
Class B Foam Agents are ideal for suppressing fires involving petroleum-based products, LNG, rubber, and flammable and combustible liquids; such as diesel fuel, crude oil gasoline and ethanol.

ANSULITE Alcohol-Resistant Aqueous Film-Forming Foam (AR-AFFF) Concentrates produce a foam that is effective on hydrocarbon fuels as well as fuels such as methanol, ethanol and acetone which have appreciable water solubility or miscibility. AR-AFFF exhibits the best cross-functional performance for flame knock-down, burnback resistance, extended vapour suppression, manufacturing and proportioning consistency, and the longest potential shelf life.

While early alcohol-resistant foams were based on mixtures of protein foams and chemicals called metal soaps, the most current alcohol-resistant concentrates are based on AFFF concentrates to which a water soluble polymer (polysaccharide) has been added. When these foam agents are applied to a water soluble fuel such as methyl alcohol, a polymeric membrane is formed between the foam and the water soluble fuel. When these foam agents are used on a conventional (water insoluble) hydrocarbon fuel, they function as an AFFF foam by forming an aqueous film at the fuel/air interface.

The foam concentrates are UL Listed and available in a 5 gal (19L) pail,  55 gal (208L) drum, 265 gal (1003L) tote, or call for available bulk delivery.

Ansul AR AFFF 3% Foam TSDS